Barrow TXYZ-A01 G1/4 Male-to-Female Anti-Twist 360-Rotary Adapter Fitting, Brass

Barrow TXYZ-A01 G1/4 Male-to-Female Anti-Twist 360-Rotary Adapter Fitting, Brass

TL;DR: TXYZ-A01 is a brass G1/4 male-to-female extender with a 360-degree rotary joint between the male thread and the female port. Once threaded into a reservoir, pump top, or block, it gives the next fitting full rotational freedom, which is useful for aligning angled adapters, snake fittings, and...

Common Applications

TXYZ-A01 is a brass G1/4 male-to-female extender with a 360-degree rotary joint between the male thread and the female port. Once threaded into a reservoir, pump top, or block, it gives the next fitting full rotational freedom, which is useful for aligning angled adapters, snake fittings, and rigid-tube terminators without forcing the threaded body to spin. The internal flow path is straight, so it adds no extra elbow into the loop. The body is short and finished in black, silver, white, or gold to coordinate with the rest of the loop hardware.

Frequently Asked Questions

Q: What problem does this adapter solve?

A: It converts any fixed G1/4 port into a rotary port, so a downstream 45-degree or 90-degree fitting can be aimed in any direction without overtightening the threaded body.

Q: Is the male side or the female side the rotating part?

A: The female port spins freely against the male base, so the male body stays clamped in the source port while the female end is rotated to the desired clock position.

Q: Does it add a bend to the flow?

A: No, the internal channel is straight through, with no angle change.

Q: What thread spec is used?

A: Standard G1/4 on both ends, with a pre-installed O-ring on the male side and a sealed bearing surface for the rotary joint.

Q: Can it be combined with another rotary fitting?

A: Yes, but stacking multiple rotary joints can amplify play. For a 90-degree turn, pair it with a fixed 90-degree elbow or a 90-degree rotary adapter.