Bykski CPU-FT5796-X Full-Metal Nickel-Plated CPU Water Block for Phytium Tengyun S5000C 64-Core ARM Server CPU

Bykski CPU-FT5796-X Full-Metal Nickel-Plated CPU Water Block for Phytium Tengyun S5000C 64-Core ARM Server CPU

TL;DR: The CPU-FT5796-X is purpose-built for the Phytium (Feiteng) Tengyun S5000C 64-core ARM server processor and matches the large rectangular socket footprint of that chip. Construction is fully metal: a CNC-machined brass top sits on a high-purity copper base, with both surfaces nickel-electroplated...

Common Applications

The CPU-FT5796-X is purpose-built for the Phytium (Feiteng) Tengyun S5000C 64-core ARM server processor and matches the large rectangular socket footprint of that chip. Construction is fully metal: a CNC-machined brass top sits on a high-purity copper base, with both surfaces nickel-electroplated to resist oxidation in long-duration server use. The cold plate exposes 0.3mm microfin channels chosen to balance flow rate against fin density, so a server-grade pump can sustain throughput without the restriction typical of denser micro-jet designs. G1/4 inlet and outlet ports on top of the block accept standard fittings, allowing integration into a custom server liquid loop or distribution manifold.

Frequently Asked Questions

Q: Which CPU does the CPU-FT5796-X support?

A: The Phytium (Feiteng) Tengyun S5000C 64-core ARM server CPU. The mounting pattern and cold-plate size are not compatible with x86 sockets.

Q: What materials are used inside the block?

A: CNC-machined brass top and high-purity copper base, both nickel-electroplated. There is no plastic in the wetted path - it is a full-metal design.

Q: How wide are the internal microfin channels?

A: 0.3mm. The width is chosen to give a high heat-transfer surface area while keeping flow restriction low enough for server-grade pumps.

Q: Does the block have RGB lighting?

A: No. This is a bare server block with no LEDs.

Q: What fittings does the block use?

A: Standard G1/4 thread on the top of the block, compatible with any G1/4 compression, barb or quick-disconnect fitting.