Granzon GC-LAN-O11-D360 PMMA Distro Plate for Lian Li O11 Dynamic, Integrated DDC Pump, 5V A-RGB, G1/4

Granzon GC-LAN-O11-D360 PMMA Distro Plate for Lian Li O11 Dynamic, Integrated DDC Pump, 5V A-RGB, G1/4

TL;DR: Built specifically for the Lian Li PC-O11 Dynamic chassis, the Granzon GC-LAN-O11-D360 mounts to the side panel and routes a dual 360mm radiator loop through a single PMMA acrylic plate. The kit ships pre-assembled with a Granzon GFM III digital-display DDC pump rated for roughly 600 L/h flow at...

Common Applications

Built specifically for the Lian Li PC-O11 Dynamic chassis, the Granzon GC-LAN-O11-D360 mounts to the side panel and routes a dual 360mm radiator loop through a single PMMA acrylic plate. The kit ships pre-assembled with a Granzon GFM III digital-display DDC pump rated for roughly 600 L/h flow at 5000 RPM, powered by Molex with a 4-pin PWM tach header. An integrated 5V A-RGB (RBW) LED strip drops onto any addressable RGB header from the motherboard or a Bykski/Granzon controller. All threaded ports use G1/4 fittings, and the plate is sized for 30mm-thick radiators to clear the case rails.

Frequently Asked Questions

Q: Which Lian Li cases does this distro plate fit?

A: It is dimensioned for the Lian Li PC-O11 Dynamic standard variant only. The O11 Dynamic XL, O11D EVO, and O11 Air Mini use different mounting patterns and need their own distro plates.

Q: What pump is included and what is its flow rate?

A: A Granzon GFM III digital-display DDC pump with aluminum heatsink, rated up to roughly 600 L/h (132 GPH) and 5000 RPM. It accepts 10-15 V DC via Molex and reports tach over a 4-pin PWM header.

Q: What RGB voltage does the LED strip use?

A: 5V addressable RGB (RBW), three-pin. Plugging it into a 12V RGB header will destroy the LEDs - confirm the header type before connecting.

Q: What radiator thickness does the plate support?

A: Plate clearance is designed for 30mm or thinner radiators in the standard O11 Dynamic. Thicker rads may force fan repositioning.

Q: Are alcohol-based coolants safe with this plate?

A: No. The plate is PMMA acrylic, which cracks on contact with alcohol-based fluids. Use only PMMA-safe coolants, and never run the DDC pump dry, even during filling, or the pump will burn out.