Bykski CP-SR-PMD3-X Server-Dedicated DDC Pump with POM Top, 700 L/H, 6 m Lift, 12V PWM, G1/4

Bykski CP-SR-PMD3-X Server-Dedicated DDC Pump with POM Top, 700 L/H, 6 m Lift, 12V PWM, G1/4

TL;DR: The CP-SR-PMD3-X is a server-dedicated DDC-class water pump pairing a PWM motor with a POM pump top inside an aluminum-armor outer housing. The pump delivers up to 700 L/H of flow and 6 m of maximum head at full PWM, runs from 12V DC through a 4-pin Molex with a separate PWM signal line, and...

Common Applications

The CP-SR-PMD3-X is a server-dedicated DDC-class water pump pairing a PWM motor with a POM pump top inside an aluminum-armor outer housing. The pump delivers up to 700 L/H of flow and 6 m of maximum head at full PWM, runs from 12V DC through a 4-pin Molex with a separate PWM signal line, and exposes two G1/4 BSPP ports on the top. Overall body dimensions are 85.6 x 74 x 75 mm, sized for tight server, render-node and workstation loops.

Frequently Asked Questions

Q: What are the maximum flow and head ratings?

A: Up to 700 L/H of flow and 6 m of maximum head at full PWM.

Q: What are the pump's overall dimensions?

A: 85.6 x 74 x 75 mm.

Q: How is the pump powered and controlled?

A: 12V DC through a 4-pin Molex connector with a separate PWM signal line for speed control.

Q: What are the inlet and outlet ports?

A: Two G1/4 BSPP ports on the POM top, compatible with any standard G1/4 fitting.

Q: What materials is the pump made from?

A: POM (Delrin) pump top with an aluminum-armor outer housing over the DDC motor.