Bykski RGV-JSB-MOD3-P-V3 — JONSBO MOD3 Distro Plate

Bykski RGV-JSB-MOD3-P-V3 — Distro Plate for JONSBO MOD3 Case

Quick answer: Bykski RGV-JSB-MOD3-P-V3 is a custom-engineered acrylic distro plate (also known as a waterway board) for the JONSBO MOD3 Case. Replaces traditional soft-tube routing inside the chassis with a single front-facing acrylic waterway. Designed for single-GPU loops with Intel CPU water block. Lighting: RBW 5v 3pin 12V 4pin RGB.

Why this distro plate fits JONSBO

JONSBO mod-series and SFF chassis prioritize compact, opinionated layouts where soft-tube routing is especially difficult. A pre-engineered distro plate is one of the few practical ways to fit a custom loop into these tight builds.

Manufacturer notes (from original spec)

Please pay attention to this product is only compatible with corresponding case, may not be compatible with other cases. Waterway Board only compatible suitable for single GPU building 6.

Specifications

• SKU: RGV-JSB-MOD3-P-V3
• Brand: Bykski
• Material: acrylic
• Compatible case: JONSBO MOD3 Case
• Loop topology: single-GPU
• CPU platform: Intel CPU
• Lighting: RBW 5v 3pin 12V 4pin RGB
• Notes from original spec: 12v 4pin; 5v 3pin

Compatibility notes (inherited from original spec)

The following references appear in the original product specification and are preserved here for reference. Distro plates do not directly interface with motherboards — verify your specific build configuration before relying on these mentions.

• Brand mentions in original spec: Intel
• Related part: B-PMD3-COV
• Related part: B-PMD3-X

What it replaces

Traditional soft-tube routing inside the JONSBO MOD3 Case. The waterway is pre-engineered into the acrylic plate — no bend work needed. The result is a clean front-panel showcase loop with a fixed, predictable flow path.

FAQ

Is "distro plate" the same as "waterway board"?

Yes — same product category. "Distro plate" is the term widely used in the international PC water-cooling community; "waterway board" is the original manufacturer term. You may see both used interchangeably.

Does it come with a pump, fittings, or coolant?

No. The plate ships as the acrylic distro plate only. Pump, G1/4 fittings, soft tube (or hard tube), and coolant are sold separately.

What lighting headers does it support?

RBW 5v 3pin 12V 4pin RGB. Plug into the matching motherboard header — no separate controller required for the supported header type.

Will this fit other versions of the JONSBO?

This plate is engineered specifically for the JONSBO MOD3 Case. Different revisions of the same chassis line may have different mounting points; verify your case version before ordering.

Last updated: 2026-05