FormulaMod Official Store
Bykski N-ST4080TQ-X Graphics Card Water Block for ZOTAC Gaming 4080 Trinity
In short: This full-coverage water block directly cools the GPU core, RAM, and VRM of the supported ZOTAC RTX 4080 graphics card. The water block is made of nickel-plated high-purity copper and acrylic, with a black anodized aluminum backplate that does not contact the graphics card.
This full-coverage water block directly cools the graphics card's core (GPU), RAM, and VRM. By directly cooling these components, you can effectively reduce temperatures, enabling higher overclocking or extending the overall lifespan of the graphics card by operating below factory temperatures.
The water block is made of nickel-plated high-purity copper to prevent oxidation. The high-flow design allows multiple water blocks to operate in series. Top and bottom connectors can be used to configure parallel or series schemes in multi-water block configurations.
Specifications
Main Body Material: Nickel-plated high-purity copper/acrylic
Backplate Material: Black anodized aluminum (does not contact coolant)
Compatibility
(Including but not limited to the following models)
Compatible with ZOTAC GAMING GeForce RTX4080 Apocalypse, ZOTAC GeForce RTX4080AMP Extreme AIRO, ZOTAC RTX 4080 SUPER-16GB AMP EXTREME AIRO, ZOTAC GeForce RTX 4070Ti-12GB AMP EXTREME AIRO, ZOTAC RTX 407OTi SUPER-16GB AMP EXTREME AIRO
Please carefully review the entire PCB image after narrowing down your choices to ensure compatibility. If you have any questions, please contact customer service for confirmation.
Compatibility is based solely on these circuit board designs.
Interface: G 1/4-inch Post
Included Components
1 Full-Coverage GPU Water Block
1 Backplate
2 Waterstop Connectors
1 Set of Mounting Hardware
1 5V A-RGB (RBW) LED Strip
(WARNING: Addressable RGB (RBW) is 5V and only compatible with Addressable RGB (RBW) components. RGB is 12V and only compatible with RGB components. Mixing them will result in malfunction and damage.)
WARNING
This product is for repair or replacement only. Returns due to compatibility issues or water/liquid ingress into the water block will not be accepted.
The manufacturer reserves the right to change the water block design to expand compatibility. The actual delivered product may differ slightly from the images shown. This product does not include an English instruction manual. Please refer to the product gallery for installation guidelines. Generally, thermal pads should be installed on the corresponding raised contact points on the water block on the graphics card, except for the GPU core, where thermal paste should be used. Installing thermal pads on other components may cause damage, poor contact, and poor performance.
We are not responsible for any damage resulting from the use of this product. Use at your own risk.
Common Applications
This full-coverage water block directly cools the GPU core, memory (RAM), and voltage regulator module (VRM) of supported ZOTAC RTX 4080 graphics cards. The water block is made of nickel-plated high-purity copper and acrylic materials, and features a black anodized aluminum backplate that does not come into contact with the coolant. G1/4 connectors at the top and bottom support multiple water blocks in parallel or series.
Frequently Asked Questions
Q: Which ZOTAC RTX 4080 graphics cards are compatible with this water block?
A: Compatible graphics cards include ZOTAC GAMING GeForce RTX4080 Apocalypse, ZOTAC GeForce RTX4080AMP Extreme AIRO, ZOTAC RTX 4080 SUPER-16GB AMP EXTREME AIRO, ZOTAC GeForce RTX 4070Ti-12GB AMP EXTREME AIRO, and ZOTAC RTX 407OTi SUPER-16GB AMP EXTREME AIRO. Please check the PCB board against the image library before installation.
Q: What kind of threads are used for the connectors?
A: All connectors use G 1/4 inch threads. The top and bottom connectors support parallel or series designs in multi-water block configurations.
Q: What materials are used for the water block and backplate?
A: The water block is made of nickel-plated high-purity copper and acrylic. The backplate is made of black anodized aluminum and does not come into contact with the coolant.
Q: What parts are included in the package?
A: The kit includes a full-coverage GPU water block, a backplate, two water seal connectors, mounting hardware, and a 5V A-RGB (RBW) LED strip.
Q: Where should the thermal pads be placed on the graphics card?
A: The thermal pads should be placed on the corresponding raised contact points on the water block. The GPU core uses thermal paste. Placing thermal pads on other components may result in poor contact, thus reducing performance.
