Bykski N-AS3090STRIX-X-V4 Full Coverage GPU Block + Backplate for ASUS ROG STRIX RTX 3080/3080Ti/3090 Gaming/EVA & TUF 3080Ti LC, G1/4

Bykski N-AS3090STRIX-X-V4 Full Coverage GPU Block + Backplate for ASUS ROG STRIX RTX 3080/3080Ti/3090 Gaming/EVA & TUF 3080Ti LC, G1/4

TL;DR: This full coverage block directly cools the GPU core, graphics memory (RAM), and voltage regulator modules (VRM) on supported ASUS ROG STRIX RTX 3080, 3080Ti, and 3090 cards. The block is constructed of nickel electroplated high purity copper with acrylic, paired with a black anodized aluminum backp

This full coverage block directly cools the video cards core (GPU), graphics memory (RAM), and voltage regulator modules (VRM). By directly cooling these components, you can achieve great temperatures along with the ability to reach higher overclocks or extend the overall lifespan of your card by running at below factory temps.

The block is constructed of high-purity copper that is nickel electroplated to prevent oxidation. A high-flow design is used to allow multiple blocks to run in series. Top and bottom ports can be used to configure parallel or serial designs in multi-block setups.

Specifications

• Block Material: Nickel Electroplated High Purity Copper / Acrylic
• Backplate Material: Black Anodized Aluminum (not in contact with coolant)

Compatibility

• (Including but not limited to the following models)
• Compatible with ASUS ROG-STRIX-RTX3090-24G-GAMING,ASUS ROG-STRIX-RTX3090-O24G-EVA,ASUS ROG-STRIX-RTX3080-10G-GAMING,ASUS ROG-STRIX-RTX3080-O12G-GAMING,ASUS GeForce RTX 3080 Ti STRIX LC Liquid, ASUS ROG Strix RTX 3080Ti-O12G-GAMING
• Please check over the entire PCB picture after narrowing your selection to ensure compatibility. If you have any questions, please contact support for confirmation.
• Compatibility based on these circuit board designs only
• Fittings: G 1/4in. Thread

Parts Included

• 1x Full Coverage GPU Water Block
• 1x Backplate
• 2x Stop Fitting
• 1x Mounting Hardware
• Thermal grease
• 1x 5v A-RGB (RBW) Light
• (Warning: Addressable RGB (RBW) is 5V and is ONLY compatible with Addressable RGB (RBW) components. RGB is 12V and is ONLY compatible with RGB components. Mix and match will NOT work and will cause damage.

Warnings

This is a repair or replacement-only item. Returns are not accepted on compatibility issues or if the block has had water/fluid run through it.

The manufacturer reserves the right to alter the block design to expand compatibility. The delivered item may not 100% match the pictured item. The product does NOT come with English instructions. Please see the product gallery images for the install guide if available. Generally, thermal pads should be installed on the card where the block has corresponding raised contact points, except the GPU core, which uses thermal paste. Installing pads on other components can lead to improper contact and poor performance.

Not responsible for any damage caused by or when using this product. Please use it at your own risk.

Common Applications

This full coverage block directly cools the GPU core, graphics memory (RAM), and voltage regulator modules (VRM) on supported ASUS ROG STRIX RTX 3080, 3080Ti, and 3090 cards. The block is constructed of nickel electroplated high purity copper with acrylic, paired with a black anodized aluminum backplate that is not in contact with coolant. A high-flow design supports multiple blocks in series via top and bottom G 1/4 ports. The kit ships with stop fittings, mounting hardware, thermal grease, and a 5V A-RGB (RBW) light.

Frequently Asked Questions

Q: Which ASUS RTX 3080/3090 STRIX cards are supported?

A: The listed compatible cards include the ASUS ROG-STRIX-RTX3090-24G-GAMING, ROG-STRIX-RTX3090-O24G-EVA, ROG-STRIX-RTX3080-10G-GAMING, ROG-STRIX-RTX3080-O12G-GAMING, ASUS GeForce RTX 3080 Ti STRIX LC Liquid, and ASUS ROG Strix RTX 3080Ti-O12G-GAMING.

Q: What materials are the block and backplate made of?

A: The block is nickel electroplated high purity copper with acrylic. The backplate is black anodized aluminum and is not in contact with coolant.

Q: What thread are the fitting ports?

A: All fitting ports are G 1/4 inch thread, the industry standard for PC water cooling components.

Q: What is included in the box?

A: One full coverage GPU water block, one backplate, two stop fittings, mounting hardware, thermal grease, and one 5V A-RGB (RBW) light are included.

Q: Is the 5V A-RGB compatible with 12V RGB headers?

A: No. Addressable RGB (RBW) is 5V and only compatible with 5V A-RGB (RBW) components. Connecting it to a 12V RGB header will not work and will cause damage.