Bykski RGV-PHA-620PC-P Distro Plate Kit for Phanteks Enthoo 620PC, PMMA Waterway + DDC Pump Option, Single-GPU Loop, 5V A-RGB

Bykski RGV-PHA-620PC-P Distro Plate Kit for Phanteks Enthoo 620PC, PMMA Waterway + DDC Pump Option, Single-GPU Loop, 5V A-RGB

TL;DR: The RGV-PHA-620PC-P is a complete-loop distro plate kit designed to drop into the Phanteks Enthoo 620PC chassis and route a single-GPU custom loop without flexible tubing between reservoir, pump and main waterways. The waterway is machined from PMMA acrylic with G1/4 ports throughout. The kit is...

Common Applications

The RGV-PHA-620PC-P is a complete-loop distro plate kit designed to drop into the Phanteks Enthoo 620PC chassis and route a single-GPU custom loop without flexible tubing between reservoir, pump and main waterways. The waterway is machined from PMMA acrylic with G1/4 ports throughout. The kit is offered with an integrated DDC pump (with armor or LCD pump-top variants) or as a plate-only version, and a pre-installed 5V 3-pin addressable RGB strip illuminates the channels. Radiator clearance inside the chassis supports up to 30mm-thick radiators. The plate is compatible with both aluminum and copper loops when matching components are used.

Frequently Asked Questions

Q: Which chassis does the kit fit?

A: Phanteks Enthoo 620PC only. The waterway geometry and mounting points are case-specific.

Q: What is the maximum radiator thickness it supports?

A: 30mm. Thicker radiators will conflict with the distro plate or fan brackets.

Q: What pump is included?

A: A Bykski DDC pump with armor (or an LCD-equipped DDC pump-top) depending on the selected kit variant; a pump-less plate option is also available.

Q: Is the lighting 5V or 12V?

A: 5V 3-pin addressable RGB (RBW). Connecting it to a 12V 4-pin RGB header will damage both the LEDs and the controller.

Q: Is the kit a single- or multi-GPU loop?

A: Single-GPU. The waterway and port layout are designed for one GPU block plus a CPU block and one or two radiators.