Bykski B-MTTP-SHR Roller-Blade Tube Cutter for Copper Hardline up to 18mm OD, 1mm Wall Thickness

Bykski B-MTTP-SHR Roller-Blade Tube Cutter for Copper Hardline up to 18mm OD, 1mm Wall Thickness

TL;DR: The B-MTTP-SHR is a roller-blade tube cutter sized for thin-wall metal hardline used in custom loops, with a capacity of up to 18mm outer diameter and a wall thickness of 1mm or less. Operation is the standard plumber's-cutter pattern: clamp the head around the tube at the cut line, tighten the...

Common Applications

The B-MTTP-SHR is a roller-blade tube cutter sized for thin-wall metal hardline used in custom loops, with a capacity of up to 18mm outer diameter and a wall thickness of 1mm or less. Operation is the standard plumber's-cutter pattern: clamp the head around the tube at the cut line, tighten the screw handle until the blade contacts the wall, then rotate the tool around the pipe in repeated passes while gently increasing pressure until the tube parts. The tool body measures 139mm long by 32mm wide. The blade is designed for copper and chrome-plated copper; it will not cleanly cut acrylic or PETG hardline, which require a fine-tooth saw or dedicated plastic-tube cutter.

Frequently Asked Questions

Q: What tubing can the B-MTTP-SHR cut?

A: Copper or chrome-plated copper hardline up to 18mm OD with a wall thickness of 1mm or less.

Q: Will it cut acrylic or PETG hardline?

A: No. The roller blade is designed for soft metals. Acrylic and PETG need a fine-tooth saw or a dedicated plastic-tube cutter.

Q: What are the tool dimensions?

A: Approximately 139mm long by 32mm wide. It fits comfortably in one hand for rotational cutting around the pipe.

Q: How is it used?

A: Clamp around the tube, tighten the screw handle until the blade bites, then spin the cutter around the pipe in repeated passes, advancing pressure each lap until the tube parts.

Q: Does it deburr the cut edge?

A: No. A separate deburring/chamfering tool is recommended to clean the inside and outside edge before fitting tubing.