Bykski B-PETGWP 500mm PETG Hard Tube Pack - 12x8, 14x10, 12x16mm OD/ID, 2 Tubes per Lot

Bykski B-PETGWP 500mm PETG Hard Tube Pack - 12x8, 14x10, 12x16mm OD/ID, 2 Tubes per Lot

TL;DR: The B-PETGWP is a 500mm length PETG hard tubing pack for hard-line water cooling builds. Each lot contains two clear PETG tubes, available in three OD/ID configurations: 12x8mm, 14x10mm, and 16x12mm. PETG bends under a heat gun at lower temperatures than acrylic and is less prone to shatter when...

Common Applications

The B-PETGWP is a 500mm length PETG hard tubing pack for hard-line water cooling builds. Each lot contains two clear PETG tubes, available in three OD/ID configurations: 12x8mm, 14x10mm, and 16x12mm. PETG bends under a heat gun at lower temperatures than acrylic and is less prone to shatter when cut, making it suitable for tight bends and complex routing. The tubes are non-toxic, resistant to common coolants and have stable light transmission. Use the matching G1/4 hard-tube compression fittings sized to the same OD.

Frequently Asked Questions

Q: What sizes are available?

A: Three OD/ID options: 12x8mm, 14x10mm and 16x12mm. All tubes are 500mm long.

Q: How many tubes per lot?

A: Two 500mm PETG tubes per lot, in the selected size.

Q: PETG vs acrylic - what is the difference?

A: PETG bends at a lower temperature and is more impact resistant during cutting. Acrylic is glossier but more brittle.

Q: Which fittings should I use?

A: Standard G1/4 hard-tube compression fittings matched to the OD - 12mm fittings for 12x8, 14mm for 14x10, 16mm for 16x12.

Q: Are the tubes pre-bent?

A: No. They ship straight and are bent with a silicone insert and heat gun during the build.