Barrow PH217XE-SDB LRC 2.0 Acrylic Distro Plate for Phanteks Enthoo 217XE, 5V 3-Pin

Barrow PH217XE-SDB LRC 2.0 Acrylic Distro Plate for Phanteks Enthoo 217XE, 5V 3-Pin

TL;DR: The PH217XE-SDB is a case-specific acrylic distribution plate machined to the Phanteks Enthoo 217XE chassis, routing the loop through pre-cut channels with G1/4 ports for an Intel CPU water block and a single GPU branch. It uses Barrow's LRC 2.0 5V 3-pin addressable lighting system, so a single...

Common Applications

The PH217XE-SDB is a case-specific acrylic distribution plate machined to the Phanteks Enthoo 217XE chassis, routing the loop through pre-cut channels with G1/4 ports for an Intel CPU water block and a single GPU branch. It uses Barrow's LRC 2.0 5V 3-pin addressable lighting system, so a single included LED strip ties directly into a motherboard ARGB header for per-LED control. The channel layout may receive minor updates over time, but the overall dimensions stay fixed so the plate continues to drop into the 217XE without modification. One LD2RT lighting strip ships in the box; additional strips can be added in the spare slots if more illumination is needed.

Frequently Asked Questions

Q: Which case does this distribution plate fit?

A: Phanteks Enthoo 217XE only.

Q: What lighting standard does it use?

A: Barrow LRC 2.0, which is 5V 3-pin addressable RGB compatible with standard motherboard ARGB headers.

Q: What socket support does the layout target?

A: Intel CPU water block plus one GPU branch; AMD blocks fit physically but the original layout assumes Intel mounting.

Q: How many LED strips are included?

A: One LD2RT lighting strip; additional strips for the spare slots are sold separately.

Q: Can it be plugged into a 12V 4-pin RGB header?

A: No. The LRC 2.0 strip is 5V 3-pin only; a 12V RGB header will burn out the LEDs.