• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

-Sapphire, XFX

  • Excellent exploded view of installation. Thermal pads all correct height. The Perspex has metal inserts for the screws, so no chance of cracking. Temperature changes were well within expectation and could not have wished for more. Some people have mentioned rough machining on the copper (as per youtube videos), but it makes no apparent difference to the cooling results. The packaging was professional. This vendor has excellent communication and customer service. Was a pleasure.
  • Originally installed this cooler using the existing size and thickness thermal pads described in the XFX documentation as the instructions here aren't really that clear . Cooler did not work and the card overheated.IT WAS MY FAULT.... There are only a few thermal pads required in the install:Nothing on the back of the card.Existing thermal pads on the metal frame are not needed. (red crosses)Because i only had 1.5mm thermal pads. (require 1.8mm NOT 2mm) i applied thermal paste to the chips (marked green) to fill out the extra space.This has me stable at 31c idle and max out at 85c in full res VR. Customer service was very quick and helpful... Happy to be using their product.
  • Was skeptical about ordering, After much research it appears all my local PC shops have order the other variant of this water block for non overseas models. Good communication by staff they really helped me out and answered my stupid questions. DHL express shipping it arrived in AU within 5 Days.The block itself is very good the quality is better than many other blocks much more expensive temp consistently in the 40c while under hard load with a 240/360mm loop 10/10 will be a regular customer and can also recommend BYSKI to anyone interesedCheers.
  • Pros:* Cheap, but still good quality* Does a good job with the cooling* RGB looks nice* Comes with free RGB controllerCons:* Does not cool the chokes (no coil while noticed because of this)* No instructions, so if it is your first time watercooling a gpu it might be a bit scary. Still straight forward* Rough machining (doesn't look like it affect performanceTemps with stock cooling:Core: 75-80CHotspot: 90-100CEdge Hotspot delta at load: -17CBoost clock: 2510Temps with Bykski block (PE360 with NF12 @ 900rmp and i9 10850k in same loop)Core: 50-55CHotspot: 65-72CEdge Hotspot delta at load: - 17CBoost clock: 2470
Reviews by category
-HP